HPE Community
M and MSM Series
1822566 Members
3456 Online
109642 Solutions
New Discussion юеВ

Client VPN L2TP

 
VittelGroup
Occasional Visitor

тАО10-18-2021 01:37 PM - last edited on тАО10-19-2021 07:01 AM by

тАО10-18-2021 01:37 PM - last edited on тАО10-19-2021 07:01 AM by

Client VPN L2TP

Hey guys!
I would like to know if it is possible to configure an L2TP Client on an MSR954 Router?
A simple dialer like pppoe-client.

0 Kudos
2 REPLIES 2
akg7
HPE Pro

тАО10-18-2021 10:57 PM

тАО10-18-2021 10:57 PM

Re: Client VPN L2TP

Hello @VittelGroup ,

You can configure L2TP, please refer below guide pg. 67

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c05067360

 

Thanks!

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
0 Kudos
-Alex-
HPE Pro

тАО10-19-2021 12:22 AM

тАО10-19-2021 12:22 AM

Re: Client VPN L2TP

Hello VittelGroup,

You may use the following document for L2TP setup which is detailed and have configuration for the routers and the clients:

https://community.arubanetworks.com/HigherLogic/System/DownloadDocumentFile.ashx?DocumentFileKey=91e0cb69-fcd5-4385-9daa-9ce7f878f50c&forceDialog=0 

Hope this helps!

I am an HPE Employee

Accept or Kudo

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.