如何config mbm ip

[watermelonyu]

hi,我在MBM底下有找到show network ,看MBM ip

請問我要改ip,要怎樣做

MBM>

The following help topics are available:



assign component assign memory bootline build fru

clear clear alert clear display clear error

clear log clear port clear srmenv config cables

connect create partition d delete partition

deposit disable alert disable remote disable test

e el enable alert enable remote

enable test examine halt in halt out

hangup help init modem locate

logout modify partition power off power on

reset save partition set set alert

set baud set dial set escape set flow

set init set membership set password set sys_serial_num

set time show show cables show duo

show error show fru show grid show log

show membership show memory show modem show network

show partition show power show system show sys_serial_num

show time show version telnet test

[watermelonyu]

Hi



The Internal LAN as you have mentioned by MBM ip.

.These are private LANs internal to each AlphaServer ES47/ES80/GS1280 system.

.These LANs provides the framework that connects the microprocessors that monitor and manage the hardware and firmware components of these systems.



The IP of Internal LANs can not modify, and can not connect with Corporate LAN.



Best Regards

Mike Wu

[watermelonyu]

Hi Joey,



Each ES47/ES80/GS1280 have a Internal LAN, each system drawer(MBM0,1,2..), CPU0/1/2/3.., PCI drawer 0,1,2.. have its own Internal IP address, it depend on cabinet number and drawer number and are assigned by firmware within power up sequence. All compoments communicate via this internal network and thru WAN port of NAT box to connect your corporate LAN.



IP address assigned by firware and communicate each other in its internal network, no need to change.