Apollo 4510 Smart Array Controller Field Upgrade

[ChrisTrigg]

Hi Everyone.

Apologies if this was already covered.

I have a client to whom we are deploying a 4510 Gen10 unit. The device shipped with its 2*Smart Array Cards, Factory Installed. Both cards are P408i-p SR Gen10 Controllers.

There is a need to connect this unit to a MSL2024 now and a P408e-p SR Gen10 Controller was procured and subsequently fitted.

The client would rather have all 3 cards as opposed to a swap. 

Additionally, Factory installed, there are 2 Networking cards installed in the chassis, one being a BCM57414 10_25GbE Adapter and a QL41401L 10_25GbE CNA.

Can I facilitate the 3 Smart Array cards and the networking with the introduction of any additional hardware, or is the swap my only option.

If anyone has a working model of connecting a MSL2024 to an Apollo 4510, I'd love to hear from you.

Please let me know if more details are needed. 

[Mohsina_4]

Hi @ChrisTrigg ,

You may need to involve the support team to set up this configuration. I would recommend logging a support call for quicker resolution. Please refer to the links below for support ticket options:

https://support.hpe.com/help/en/Content/supportAndOtherResources.html

https://www.hpe.com/psnow/doc/A00039121ENW

Regards,

Mohsina