SnapShots

[rsprott]

Hi all...

I'm new to my Nimble and want to make sure I'm not deleting something I shouldn't. I had a case on snapshot retention and I have many snapshots that fall outside of my retention period. The tech explained many ways how this can happen... Resizing a volume, manual snapshots, 3rd party software snapshots... etc. So, I'm looking in the cli  and the GUI to confirm a few things before I delete the SS... Is it outside my retention period, is it online and/or is it connected to anything. The tech said something about being "managed" but so far every snapshot I've looked as in the cli shows "Is managed: NO" So, I'm not sure what I'm seeing there. 

So, here's an example and what I'm looking for before I delete... Should I be looking at anything else?

My steps.

1. Look in GUI under the Volume and Protection and find a snapshot that falls outside my retention period. 1 year... Make sure there's no online indicator.

2. Run the following in cli: snap --info Projects-files-projects-1-hr-2019-01-23::16:05:00.000 --vol Projects2

Output:

Nimble OS $ snap --info Projects-files-projects-1-hr-2019-01-23::16:05:00.000 --vol Projects2
Name: Projects-files-projects-1-hr-2019-01-23::16:05:00.000
Volume name: Projects2
Serial number: 4a9fb48e201522b86c9ce900703c8a7f
iSCSI target: iqn.2007-11.com.nimblestorage:projects2-projects-files-projects-1-hr-2019-01-23::16:05:00.000-v7e6b949901e1a8e9.00000080.7f8a3c70.s7e6b949901e1a8e9.00000081.00097fea
Description: Created by protection policy Projects-files schedule projects-1-hr
Size (MiB): 25165824
Status: Okay
Allow writes: No
Online: No
Offline reason: User
New data (MiB): 18558464
New data compression: 1.04X
Number of connections: 0
iSCSI: 0
FC: 0
Schedule: projects-1-hr
Origination group name/ID: BNCSAN
Is replica: No
Replication status: Complete
Is unmanaged: No
Created: Jan 23 2019 16:05:00
Last configuration change: Jan 30 2019 08:19:58
Access Control List:
Apply to: volume & snapshot
Initiator Group: bncfs06
Access Protocol: iscsi
CHAP user: *
Initiators connected:
Agent Type: none
Application identifier:

I look at "Online" and "Initiators connected"  In this case I see "No" and nothing so I'm good to delete the snapshot... I do that from the GUI.

Should I be looking at anything else? What exactly does "Is unmanaged" mean? I would think if "Is unmanaged" is NO than it is managed and should have been purged on the retention schedule... 

Thanks for your assistance...

[Cali]

Hi,

I use this command to find and then delete these unmanaged (orphaned) Snaps:

snap --list --unmanaged --all

Cali