Array Setup and Networking
1825678 Members
3668 Online
109686 Solutions
New Discussion

Alletra 5030 - add second 5030 for Peer Persistence

 
SOLVED
Go to solution
Andreas ZEILER
Senior Member

Alletra 5030 - add second 5030 for Peer Persistence

Hi Folks,

we have an Alletra 5030 with latest Software, and wanted to add a new purchased 5030 via Alletra GUI. The new 5030 was found, but coudn't be added due to an older software version on the new purchased array.

So we did an array setup, on the news 5030 without any vadditional config, and were able to download and install the latest SW.

Question: What is the best practice to add the array now? I guess we have to execute an "array --resetup" on the new Alletra 5030, and retry the adding proceure from the Management of the existing system?

Thanks a lot - Andreas

5 REPLIES 5
Andreas ZEILER
Senior Member
Solution

Betreff: Alletra 5030 - add second 5030 for Peer Persistence

Hello,
can now answer the question myself. An Alletra 5k / 6k with a completed setup can also join another group. The prerequisite is that the interfaces for group traffic can communicate with each other. We had the problem that the corresponding vLAn was not properly tagged.

For an array in the "resetup" state (array --resetup), it is not possible to join a group of another array.

 

Kind Regards, Andreas

NCG1
HPE Pro

Re: Betreff: Alletra 5030 - add second 5030 for Peer Persistence

Hi Andreas,

 

Hope you are doing good.

 

As you mentioned, the arrays can be added to a group even if they are fully configured.

Login to the primary array GUI > Hardware > Add Array to Group.

 

Pre-requisites are, both the arrays should be of same mode, same OS level and same network.

 

Please let me know if this answers your query. If you have any other questions, let me know.

 

 

Regards,

Naveen Chandru G   



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
NCG1
HPE Pro

Re: Betreff: Alletra 5030 - add second 5030 for Peer Persistence

Hi Andreas,

 

Hope you are doing good.

 

Following-up to check if your query has been answered and if you have any questions or need any assistance in this case.

 

 

Regards,

Naveen Chandru G 



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
NCG1
HPE Pro

Re: Betreff: Alletra 5030 - add second 5030 for Peer Persistence

Hi Andreas,

 

Good day!

 

This is the final follow-up. Please let me know if you have any questions or need any clarifications on the query raised.

 

 

Regards,

Naveen Chandru G  



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
NCG1
HPE Pro

Re: Betreff: Alletra 5030 - add second 5030 for Peer Persistence

Hi Andreas,

 

Good day!

 

I see that you have mentioned the case as solved. Hence, I'll go ahead and close this case.

 

 

Regards,

Naveen Chandru G 



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo