Change Nimble management IP address

[CadenLange]

Hi
I’m considering a small change to a Nimble IP management address. It’ll just move to a new address within the same range (eg from x.x.x.101 to x.x.x.201 in a class c subnet. Is this as simple as making the change in the nimble administration—>network interface or does it mean editing any files via cli? Thanks

[support_s]

System recommended content:

1. How to Change the IP Address on an InServ or SP

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[mamatadesaiNim · Accepted solution]

You should be able to do this from the UI.  Review this KB, it is focused on CLI:
https://infosight.hpe.com/InfoSight/media/kb/active/sup_KB-000002_Re-IPing_an_Array.whz/index.html#vot1494617448446.html

Do you have vvols configured?  If so, there will be disruptions/certificate changes needed further.

[CadenLange]

Hi
There are no vvols configured so is it just a case of making the change in the nimble UI?

Can the diagnostic IPs be changed in a similar way?

Thanks

[mamatadesaiNim]

> is it just a case of making the change in the nimble UI?
Yes, UI or CLI both work

> Can the diagnostic IPs be changed in a similar way?
Yes