HPE alletra MP B10000 dHCI

[WilliamSmith11]

Hi 

I am just about to start a new installation with an Alletra MP B10000 and two proliant server DL360 G11 that come with the solution,

I am concerned about the Data Service Connector machine required to complete the deployment. 

But in the manual "HPE GreenLake for Private Cloud Business Edition with Alletra Storage MP Deployment guide for new installations,"  page 20 indicates:

"The method of server discovery for HPE Alletra MP based deployments is through the Data Services Connector VMs that are installed on each server in the factory."

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00004976en_us&page=GUID-1B90125E-DB0D-4A0D-A941-0CF00740CB83.html&docLocale=en_US

1-If I have read correctly the machine come preinstalled on each proliant DL360 G11 from the factory?

2-The process is similar to the dHCI deployment with Alletra 6000?

3-I need a separate Vcenter or like in the dHCI deployment with Alletra 6000, I have the option to deploy a new one within the deployment procedure using the new HPE DL360 G11 hardware.?

Kinds Regars 

Williams

[rmv978 · Accepted solution]

Below Answers:

1.If I have read correctly the machine come preinstalled on each proliant DL360 G11 from the factory?

A. Data Services Connector VMs  are installed on each server in the factory.

2-The process is similar to the dHCI deployment with Alletra 6000?

A.There is no Data Services Connector in the dHCI deployment with Alletra 6000.

3-I need a separate Vcenter or like in the dHCI deployment with Alletra 6000, I have the option to deploy a new one within the deployment procedure using the new HPE DL360 G11 hardware

A.Yes we have the option to deploy new Vcenter during Setup.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".