Setting activity timeout length for Alletra 9000 local GUI

[se12]

Hello

The local GUI on our Alletra 9000 has an inactivity timeout set to 15mins.

Can you tell me how to change this to 30mins?

Thanks

[Mahesh202]

Hi se12,

Could you please confirm whether you are referring to set the maintenance window duration On the HPE Alletra 9000 array?

Regards
Mahesh.

[se12]

Hi Mahesh

Thanks for the reply - no this isn't what I'm asking about.

There are two GUIs that I can use to manage our Alletra 9000 - I can use DSCC through HPE Greenlake or I can browse to the IP address of the Alletra on our local LAN (what I refer to as local GUI).

When I am logged into the local GUI the session will timeout after 15mins of inactivity - I want to change this to 30mins.

Thanks

[Cali · Accepted solution]

Hello,
I have the same issue sometimes on Primera.
I know a Command, that helps for Primera SSMC, but never try for local GUI.

setwsapi -timeout <minutes>

You can try and give Feedback.

Cali

[se12]

Hello Cali

Thank you for this post - this has worked as can be seen by the showwsapi command 

cli% showwsapi -d
--------------------WSAPI Server Configuration---------------------
service State : Enabled
HPE Alletra 9000 UI State : Active
server State : Active
HTTPS Port : 443
Number of Sessions Created : 0
System Resource Usage : 192
Number of Sessions Active : 0
Version : 1.10.0
Event Stream State : Enabled
Max Number of SSE Sessions Allowed : 5
Number of SSE Sessions Created : 0
Number of SSE Sessions Active : 0
Session Timeout : 30 Minutes
Policy : tls_strict,no_per_user_limit
API URL : https://

[Sunitha_Mod]

Hello @se12,

Awesome! 

We are extremely glad to know the problem has been resolved.