HP 5412 Polycomm phones config help

[DINO_TRILLIAN]

Networks

VLAN 20 Voice 192.168.0.1/24

VLAN 30 DATA 192.168.1.1/24

The computer will be connected via the Polycom phones

LLDP will be enabled.

Sonicwall will be the main router

I need some configuration advice on the HP 5412. Whats the best way to configure it, I need to use ports A1-20, B1-20, C1-20, D 1-20 for phones and computers. Dont really to follow this, just to be able to use 92 ports for phones and pcs (shared).

Windows Based will be my DHCP  server for both data and voice networks.

VLAN ID Name                           | Status   Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1     DEFAULT_VLAN                   | Port-based No   No
  20     Voice_VLAN_20                   | Port-based Yes No
  30      DATA_VLAN_30                   | Port-based No   No

vlan 20
  name "Voice_VLAN_20"
  no ip address
  qos dscp 101110
  voice
  exit
vlan 40
  name "DATA_VLAN_30"
  no ip address
  exit

Default gateway on sonicwall 192.168.0.1 subnet 255.255.255.0

Windows Data VLAN DHCP 192.168.0.2-192.168.0.250

Windows VOICE VLAN DHCP 192.168.1.2-192.168.0.250

I am having trouble with the proper config. The voice VLAN is suppose to be tagged and data untagged and all ports trunk the pass both vlan via same wire.