C1553A Autoloader magazine ejecting

[CA1092640]

Hi,
I've got a DDS2 autoloader. Since yesterday, it ejects the magazine whenever I insert one.

I've tried two magazines, both with unlabeled cartridges, the magazines themselves are also without any labels.

The changer checks the first slots: 6, 5, 4, then the message 'unloading', followed by 'ejecting' is given.

This also happens when the device is not connected to the SCSI bus.

The ltt tools give no error, although obviously I can't actually check the changer...

Does anybody know what might be the reason for this error?

Tia,

Arno

[CA1092640]

Ok, only as an information for other with the same problem:

Problem is solved. The autoloader magazine turning mechanism had to be cleaned.
I opened the external case, and with a cloth cleaned and greased the big gear turning the mazine.
Since then, everything works fine Again.

Arno