HPE Alletra B10000 Peer Persistence in DSCC

[CadenLange]

Hi all

I have a new HPE Alletra B1000 array solution that includes Active Peer Persistence. I have configured the solution using DSCC to create the replication partnerships and protection policy but I cannot see where I can execute a 'switchover'

I'm probably just missing it, but I've looked in both Data Ops Manager and Block Storage but don't see any option for a switchover\failover etc. I would expect to see this as an action on the Volume Set. I can see the option from the Alletra B10000 On-Node User Interface and this works fine.

Where is this option in DSCC??

Secondly - where is DSCC can I find information on the sync status of the replicated volumes? Again I can see this in the local UI but I want to monitor the status of all replicated volumes (to make sure there are in sync) from DSCC.

many thanks

[Satish04 · Accepted solution]

Hi CadenLange,

Please refer to the below videos for switchover/failover.

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00031083en_us
https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00030804en_us

To check the status of the replicated volumes, follow the below steps.

1. Log in to the DSCC (https://common.cloud.hpe.com/).
2. Launch the Data Services Cloud Console.
3. Then launch the Block Storage.
4. Select the volumes under the main dashboard.
5. Then select the volume set, and then click protection.
6. Here, you will see the protected volumes.

Hope this helps.

Regards,
Satish

[Satish04]

Hi CadenLange,

I hope the given information helped you. Please mark this as the accepted solution if no further assistance is needed.

Regards,

Satish

[support_s]

Hello,

We just wanted to follow up once more to see if your issue has been resolved. If so, we’d really appreciate it if you could click the "Accept As Solution" button on the most helpful response.

This helps other community members who may be facing the same issue. If you still need assistance, feel free to let us know — we’re here to help!

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".