1Bay cannot see SAN fabric, other bay's can

[Baronson]

Hello, 

A couple of months ago, we abrutply lost access to our SAN from one of our blades.  Any blade I stick into this particular bay cannot see the SAN fabric.  When I look at the SAN Fabrics - Server connections in virtual connect, this particular bay doesn't have an uplink port attached to it.  Would anyone have any idea why this is happening?  I have attached a screenshot of the issue. I have duplicated a profile from a working blade, to no avail.

I recently updated all the firmware in the hopes it would fix the problem.  It does not.  

The issue is with bay 4.

[LouisH]

Baronson,

Please check to ports at the far end of the Fabric (A) for this server connection. I had a similar problem and found out that the fiber cable needed "reseating". Link LEDs were good on both ends, but would not login to fabric.

Regards,

Louis