6125xlg link-aggregation

[Hugo29]

Hi,

Connected 6125xlg card to 5940 irf stack. two TenG ports with Link-aggregation. Ports are up, no mac addreses on these ports from both sides. Counters on blade switch shows input packets, output zero.  On 5940 there is output packets only.  Removed one link, didn't help. Removed BAGG interface on blade, all works fine. 

Is there some problems with link aggregation on 6125xlg?

Configuration was simple:

int bri 1

link mo dyn

int te 1/1/1

port link gr 1

int te 1/1/5

port link gr 1

int bri 1

port link-t trunk

Best regards,

Hugo

[drk787]

Hi @Hugo29 

Can you share the configuration of 5940 swtich. Other option is to try removing the BAGG interface and creating it again on both the switches.