BladeSystem - General
1827470 Members
2464 Online
109965 Solutions
New Discussion

adding blade in enclosure gives an error

 
Shrinivas C. Kulkarni
Occasional Contributor

adding blade in enclosure gives an error

Server Blade Enclosure Inadequate Power To Power On: Lost Redundant Power (Enclosure Address 0000, Slot 7)

power configration -ac redundant
dynamic power mode enable
4 REPLIES 4
JKytsi
Honored Contributor

Re: adding blade in enclosure gives an error

Update ILO Fws and then OA
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Ken Henault
Honored Contributor

Re: adding blade in enclosure gives an error

Shrinivas C. Kulkarni
Occasional Contributor

Re: adding blade in enclosure gives an error

chk my attachment

Timur S Lukovkin
Regular Advisor

Re: adding blade in enclosure gives an error

hi

Make sure the ILO FW is the latest...rev 1.70, also check PMC, Check this out:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01668472&jumpid=reg_R1002_USEN