c3000 optional kvm module

[David S Reynolds]

I installed the optional kvm module but can't figure out how to get it to work. There is no documentation on this in the c3000 user guide. I tried connecting to a kvm switch but get no connection. There is a selection on the insight display for KVM but it just goes to a blank screen when selected. If anyone has gotten this to work please help me.

Thanks,

Scott

[Raghuarch]

Hi David,

you need to do a change in the Active OA page.
Select the rear USB enable it. OA will restart after that you can use the KVM module.

[Douglas Munn]

I also have a C3000. I do not know what you refer to about enabling USB in the OA. Where would this be found?

[Douglas Munn]

Is the KVM module designed only to be plugged into other KVMs or can it be used directly with a display, keyboard and mouse?

I can't find any docs on it.

[Ecu2015]

I have you need in the path 

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01633012&sp4ts.oid=3692955