C7000 blade-Virtual Connect Domain firmware upgrade

[Dartmanrod]

I successfully upgraded VC FlexFabric firmware to 4.85 using the VCSU utility on a c7000 blade enclosure. All of the blades and communication infrastructure seem to be working fine. However, I am unable to connect to the FlexFabric management console. The link from the blade admin web page connects to nothing. I used to be able to connect to it. I could not previously make changes, because it requred Flash; hence the update in firmware. I am able to connect using the VCSU utility and query the details of the FlexFabic module. Is this the latest version for the firmware (4.85) and do I need to do anything to enable the management console? Any help or direction would be appreciated.

[support_s]

System recommended content:

1. HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem - Virtual Connect Firmware Update Failure due to Domain Configuration in "Not In Sync" State

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Dartmanrod]

I will try to reset the devices in order to get them in sync. Unformtunately, it will have to wait a week for the next off-business timeframe. I will report back the results to this thread.

[Suman_1978]

Hi,

I hope you did refer to the "HPE Virtual Connect 4.85 Release Notes" before updating.
To upgrade to Virtual Connect 4.85, the minimum Virtual Connect Support Utility (VCSU) version required is 1.15.0

Thank You!

I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Dartmanrod]

@Suman_1978 

Yes, I followed the guidlines and used a compatible VCSU version. Ther upgrade was successful in that all connectivity between servers still works. However, I am unable to conect to any GUI page to administer VC. There is simply nothing present. I am unable to do anything with the FlexFabric unit.

[Suman_1978 · Accepted solution]

Hi,

Any error messages on the GUI page or Event logs?

If you are using a browser, have you tried the usual things like, clearing History, cookies, etc.

Virtual Connect Firmware 4.85 Removes Dependency on Adobe Flash Player for the Virtual Connect Manager (VCM) Web User Interface (GUI)

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Dartmanrod]

I had cleared cache and temp files on the Edge browser I was using, that was still not working. Per your receommendation I tried using Chrome and it worked! I am able to navigate and administer everything. I normally start troubleshooting with the basics like, "Is it plugged in?", "Is it connected?", "Is <Caps Lock> on?". I had not tried a different browser. I did some investigation and if I allow the connection to VC to run in compatibility mode within Edge, then it works as well.

So either Edge in compatibility mode or Chrome now works.

Thank you so much. Problem solved.

[Sunitha_Mod]

Hello @Dartmanrod, 

Excellent! Glad to know the problem has been resolved.