C7000 internet connection

[MikeT2006]

Hello,

i have an hp c7000, with BL465C Gen8 blades, with Virtual Connect 455880-B21, with transceivers 453154-B21. i have currently setup a network but when i try to add a port, it gives me a red X mark. So my question is, do i need a certain type of switch that is capable of communicating with the transceiver or will any switch/router work and im experiencing another issue with my setup/hardware? im very new to this type of networking and purchased this system since i couldnt pass it up for what i paid for. This is for home use so i dont have knowledge on the business/enterprise type of setups. Thanks, Mike

[Supreeth_B]

Hi @MikeT2006,

You can refer to this user guide, Hope it helps 
HPE Virtual Connect for c-Class BladeSystem User Guide 

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

Regards,
Supreeth.

[MikeT2006 · Accepted solution]

Update, I was able to find a solution by removing the Flex 10 module and using a HP VC FlexFabric 10Gb/24-Port Module, there must be compatibility issue with using the copper SFP module. Thanks, Mike

[Sunitha_Mod]

Hello Mike,

That's Awesome! 

We are delighted to hear you were able to find the solution and we appreciate you for keeping us updated.

[Rakesh0404]

We are glad that your query has been is resolved. Your case will be closed now.