BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing interconnects in C7000 enclosure

 
Highlighted
Frequent Advisor

Changing interconnects in C7000 enclosure

I have a question about upgrading the fibre channel interconnects in our C7000 enclosure.  Can you have two different modules side by side (slot 5 and 6) in an enclosure?

Right now we have two Brocde 4/12 SAN switches in slots 5 and 6 but need to upgrade them to Brocade 8/12c SAN switches.  Are we able to disable the existing 4/12 module in slot 5, install the new 8/12c switch, configure it and then bring it online and then do the same for the other module in slot 6?  Or do the two modules have to be match and be done at the same time?

Mike
1 REPLY 1
Highlighted
HPE Pro

Re: Changing interconnects in C7000 enclosure

Hello,

Good day,

you cannot have 2 different model FC in side bye side in C7000..it should be same model.

With respect to upgradation, We might required ceratin detail and it need indept analysis, hence kindly log a HPE support case.

 

 

I am an HPE Engineer.

Accept or Kudo