Configuration for new blade replacement

[KKL]

Dear All,

I will do replacing blade server old one (Gen08) to new one (Gen10) with exisiting enclosure. What I want to know is need to do reconfigure after new blade replacement. if yes, could you share what configuration are need to reconfigure and procedure detail?

As my understand need to do following configuration, is it correct?

1. iLO ip reconfiguration 

2.. MAC address modification 

3. server profile reassign 

If there is any require configuration, please share.  

[ManBha]

Hello,

Yes, please install the blade and EBIPA can be used to assign IP to the bay.

Also, please do create a new profile for Gen10 server and assign it.

Thanks.

[KKL]

@ManBha 

Thanks for the response. Could you share the sample to add profile for gen10 blade and any reference document.

[ManBha]

Hello,

Hope this helps.

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00102211en_us [refer page 174 onwards]

Thanks.