Configuring Flex-10

[Gene Kenny]

Hello

I am setting up my first Flex-10. I create a 4 networks and I adjust the speed of each nic under the advance tab. When I go to server profiles I only see Lom1:a Bay 1 and Lom2:a bay2. I do not see the other 6 nics. I do see the nics in the device information tab. The VC firmware is at 2.10.

Thanks,

[JKytsi]

For starters ...You are using factory default MAC addresses and VC isn't a VC with those.

[Gene Kenny]

Thanks, I changed the the mac addresses to HP defined and I am still seeing only the two nics, under server profile. I do see all the nics under the server information tab on the OA

[David Claypool]

What exact blade server model has this profile been assigned to?

[Gene Kenny]

The blade is a BL460C G6 sing the NC373i nic

[raadek]

I vaguely remember it always displays just 4 connections initially (for whatever reason).

Simply clicking "Add network connection" should solve it though.