Getting Direct Attached Storage connected to blades

[chuckk281]

If you have a question on how to get HP Modular Storage Arrays (MSA) storage systems to get connected to your BladeSystem here is good advice from Lenore: "The only MSA onfiguration that’s supported is: P700m controller in the blade server, connected to SAS switch(es) in the enclosure, connected to the MSA2000sa. Only the P700m mezzanine card is supported for this configuration with blades. Here’s some links for reference: Blade SAS solution main page: www.hp.com/go/directconnect Deployment guide: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc= us&docIndexId=64180&taskId=101&prodTypeId=3709945&prodSeriesId=3832737