getting packet loss

[BALAJI_16]

In my blade center founded with two GbE2c switch its new infrastructure.now i'm getting 60% packet loss on both the switches give me some solution.

Note-: i'm getting packet loss between the management console .in down link ports i'm not get any packet loss

[Adrian Clint]

Look at some of the questions in the GBE2C support site
http://www.bladeconnect.com/

[BALAJI_16]

there also i raised this question but no reply.

[HEM_2]

If it is only happening on the management IPs of the GBE2c switches, make sure the firmware is at least 2.04.

Before 2.04 firmware there was only a single MAC address for the whole switch. After 2.04 there was a separate MAC address for the management interface.

Having only 1 MAC address for the switch mgmt interface and general switching functions like Spanning Tree Protocol would cause intermittent connectivity issues.