HP Blade 460c G6 Flex-10

[ramdom]

Hello,

Updated HP BL460c G6 with SPP 2017.04.0
After the update at server startup time the "Flex-10" does not light up. How to restore the work of Flex-10?

before updating

after update

[smokin901]

Hi,

Can you provide more information like which commponents got updated from which firmware to which firmware

[SumeetK]

Hello,

Version:2016.10.0 (24 Oct 2016) was the last SPP that will carry support for HPE ProLiant G6 servers. 

Version:2017.04.0 (21 Apr 2017) is not recommended for G6 servers. 

BL460c G6 goes with Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter.

In this situation, you can check if the NIC is being detected in RBSU/BIOS under PCI device. If yes, please download and run the SPP Version:2016.10.0 in interactive mode to re-flash the firmware. ( Might require you to select FORCE switch to push firmware)

If not, please log a case with HPE support for further assistance.