HP Blades Virtual Serial Port VSP Console Cannot Reconnect after Disconnect

[ss]

I am having and issue when using Serial Console on Blades via OA:

I can’t seem to figure out how to disconnect and then reconnect.

I’ve closed the SSH session to the OA, now I can’t get back to the console of that blade.

If I do CLEAR INTERCONNECT SESSION 1

I still can’t get in. I’ve rebooted the blade, but no luck.

This is what I see:

OA-1XX1XE197XX9> CONNECT SERVER SERIAL 1

Connecting to bay 1 ...

Starting virtual serial port.

Press 'ESC (' to return to the CLI Session.

OA-1XX1XE197XX9>

OA-1XX1XE197XX9> CLEAR INTERCONNECT SESSION 1

Session does not exist.

---------------------------------

Does anyone have ideas?

Thank you!

[Jags_21]

Hi,

Issue relates to which version of iLO, the one advisory states a known issue check the below link

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01301314&lang=en&cc=us&taskId=135&prodSeriesId=1146658&prodTypeId=18964

Also on using the VSP check the iLO3 configure and operation guide

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00263709/c00263709.pdf

Provide the complete details on which model you are facing the issue

Thanks,

Jagadish

-----------------
Was the post useful? Click on the white KUDOS! Star on the left side of this post.
For HP Guided Troubleshooting; http://www.hp.com/support/hpgt