HPE Community
BladeSystem - General
1825766 Members
2357 Online
109687 Solutions
New Discussion

HP Firmware ISO Fails to boot correctly from USB Stick - BL460c

 
Alisdair Philp
Occasional Contributor

‎10-01-2010 02:48 AM

‎10-01-2010 02:48 AM

HP Firmware ISO Fails to boot correctly from USB Stick - BL460c

We have created a Firmware USB stick using the HP USB Key Utility and the 9.10 ISO image. We have added the latest BIOS / SmartArray FW scexe files in to \HP\swpackages as instructed on the HP webpage. When we boot the blade via iLO Virtual USB from a PC the boot fails at 34%. The USB stick works fine when plugged directly into a DL380G7 for example. Anyone got any ideas or experiences trying this out?

 

Message:

 

"Boot Failed: Please change disks and press a key to continue"

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.