HP VC flex-10/10d module domain configuration not in sync firmware update failed

[bleonardPTI]

A recent firmware update has broke our Virtual Connect. I used the vcsu tool to update our two hp vc flex-10/10d modules. The standby unit was upgraded to 4.85, but the primary unit is still at 4.10. The primary unit has a Domain Configuration: Not in sync error, and the secondary unit has a Module Configuration: Invalid error.

Any suggestions on to how I get these back healthy again? All help is greatly appreciated. Thanx

[Rama2]

• Perform a health check using VCSU.

• Take a backup of the current configuration.

• Open VCSU in interactive mode and Run as Administrator.

• Type Update to initiate the update process.

• To perform a force update, type: version,health.
  

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".