hpasmcli -> show fans gives Segmentation fault error and exits

[sajuars]

Only the "show fans" command returns some output and then exits with message "Segmentation fault".
hpasmcli> show fans
Fan Location Present Speed of max Redundant Partner Hot-pluggable
--- -------- ------- ----- ------ --------- ------- -------------
#1 I/O_ZONE Yes NORMAL 45% Yes 1 Yes
#2 I/O_ZONE Yes NORMAL 45% Yes 1 Yes
#3 I/O_ZONE Yes NORMAL 45% Yes 1 Yes
#4 I/O_ZONE Yes NORMAL 45% Yes 1 Yes
#5 PROCESSOR_ZONE Yes NORMAL 41% Yes 1 Yes
#6 PROCESSOR_ZONE Yes NORMAL 41% Yes 1 Yes
#7 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
#8 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
#9 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
#10 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
#11 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
#12 PROCESSOR_ZONE Yes NORMAL 36% Yes 1 Yes
Segmentation fault

The machine is a BL480c with Redhat 5.

I restarted the hpasm process but the error still exists.

[sajuars]

There is also a core generated every hour for hpasmcli.
Here's the dump of the core:
Core was generated by `/sbin/hpasmcli -s SHOW FANS'.
Program terminated with signal 11, Segmentation fault.

warning: svr4_current_sos: Can't read pathname for load map: Input/output error
(gdb) where
#0 0x4f5a5f52 in ?? ()
#1 0x0800454e in ?? ()
#2 0x08064a84 in stdin ()
#3 0xffff002d in ?? ()
#4 0x0804f7fe in ?? ()
#5 0x08070df8 in ?? ()
#6 0x08070e98 in ?? ()
#7 0xffffd498 in ?? ()
#8 0x4d524f4e in ?? ()
#9 0x08004c41 in ?? ()
#10 0x00000009 in ?? ()
#11 0xffffd498 in ?? ()
#12 0x08049308 in ?? ()
#13 0x00253633 in ?? ()
#14 0x00000001 in ?? ()
#15 0x000000fe in ?? ()
#16 0x00000032 in ?? ()
#17 0x080665e0 in stdin ()
#18 0x00736559 in ?? ()
#19 0xffffd5e8 in ?? ()
#20 0x080496cc in ?? ()
#21 0xffffd80e in ?? ()
#22 0x00000001 in ?? ()
#23 0x08050031 in ?? ()
#24 0x00000000 in ?? ()