iLO access with OA

[Jeff Hui]

For C3000, can I access Server Blade iLO if OA is break down?

[Walid Halabi · Accepted solution]

Hi Jeff,

yes, you can,t access the server iLO because the OA is the bridge between the servers and outside management.

Regards,

[Jeff Hui]

Thanks.

[Raghuarch]

Hi Jeff,

If you know the IP address of the ILO's you can access the them even if the OA is down.

For that you should know the IP address of iLO.

If you don't know the IP address of the ILO's you can find it in the RBSU or HPSIM if you have in your network and discovered the OA.

Regards,
Raghuarch

[Raghuarch]

Hi Jeff,

The best practices and Tips refer:
http://h18013.www1.hp.com/products/servers/management/ilobest-practice.html

Regards,
Raghuarch

[Adrian Clint]

Raghuarch

A thought.....what happens when EBIPA is used for the iLO addreses when the OA is down?

[Raghuarch]

iLO's will be up and running with EBIPA.
Its a 2 a steps communication.
1. Assign IP, It will be over.
2. Communicate with the IP, this will fail .. but the IP will remain unchanged.

Regards,
Raghuarch