Issue with a Blade 460c

[Pedr_1]

Hello everybody

I have an Enclosure 7000c with all bays full. One of blades, it shows me as degraded, at IML Log this appears:
Server Blade Enclosure Inadequate Power To Power (Enclosure Address 0000, Slot 2)

And some messages like this:
CPU(s) operating at reduced performance level due to an enclosure power event.


Power System is well, it doesn't report me anything.


Can somebody tell me how can I resolve this problem???

Thanks.

[gregersenj]

Check the reportet power consumption, on the other servers.

Especially if you got servers with PMC ver 3.3, It's got a known issue, with the power usage reporting.
If it report a high usage, you can't power more servers on.

BR
/jag

[patrick haynes]

there was also a recall on c-class power supplies, might want to double chk that too

[patrick haynes]

firmware?

[Bhavin-Desai]

Do you see any errors in OA syslog with respect to this blade server Bay.

Is it Vmware ESX installed blade?

[Pedr_1]

Hello again

This is OA firmware: 2.51 May 28 2009.

In others blades I see this warning:

CPU(s) operating at reduced performance due to an enclosure power event.

But they are working well....

[The Brit]

Probably a stupid question, but,

Do you have a full compliment of 6 power supplies?

Is dynamic power mode enabled, or not??

Have you set a "Static Power Limit"?

Dave.

[Pedr_1]

Hi Brit

I have 6 power supplies.

Dynamic power mode is enabled.

and Static Power Limit is doesn't set, it empty.

[patrick haynes]

upgrade the firmware of the oa's and the ilo's at the very least!

[Pedr_1]

Ok thanks at all