Lots of error : Mgmt processor failed in blade XX

[laurent49]

I have C7000 with 6 BL460C.

I often have many BL460C in red
when watching ILO console :

Mesg : Mgmt Processor failed in blade XX

why ?

[sblsbl312]

Make sure the iLo f/w are 1.35 and the OA f/w on at least 1.30. Also, if the enclosure is not on the Lan yet, take out the gateway address for the blades. PS: Pls let me know if there is a better fix.

[Fabian Calvo]

As sblsbl312 mentioned, you need to update the iLO firmware to 1.35, however, the OA firmware should be updated to 2.02a, this problem was fixed on version 2.01 :)

[James ~ Happy Dude]

Hello,
Refer :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01113006

This is the ONLY revision available at this time.

Regards,
James.