Mutliple Network and Single Network in Virtual Connect

[Benjamin_Chiu]

Environment:

Onboard Administrator: C7000 version 4.95

Virtual Connect: version 4.70

HPE ProLiant BL460c Gen10 Server Blade

We want to use the "Mulitple Network" in server profile, and use this for the Windows 2016 Hyper-V, we trunked all the VLAN and will use the 2 network cards for teaming in Windows 2016.

Background:

In Virtual Connect, we created a server profile for the blade server.
Under the "Ethernet Adapter Connection", only single network is workable for the blade server (i.e. vlan232), using 10.10.232.100 as example

If we chose the "Multiple Network" (i.e vlan233 & vlan234 & vlan235) , and keep using the same IP address unchanged, it cannot connect to the network.

We tried to use "Multiple Network" with vlan232 , and keep using same IP address, it still CANNOT connection to the network. 

Anyone have idea about using the "Muliple Network" in the Server profile?

[Benjamin_Chiu · Accepted solution]

I may find the resolution now.

Stupid me, In Hyper-V, Virtual Switch Manager

Virtual Switch Manager in Hyper-V

I forgot to enable the "Enable virtual LAN identification for management operation system" and type the VLAN ID whcih I should use for the Hypervisor OS.

[Kashyap02]

Is the issue resolved ? or any other help needed ?

[Benjamin_Chiu]

Yes, the issue is resolved.