OA firmware update fails

[MMP]

When i update OA firmware from the QA web broswer, the error is as follows
"
The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML documen...
"
Can someone help me how to recover from this error and the reason for this error.

[Adrian Clint]

Options:

Clear your cache

Use a different version of IE

Failover the OA

Use the Online OA Firmware update program

[JonathanT]

I just updated my OA firmware using the HP Bladesystem Firmware Maintenance Tool. You can download the bundle here:

http://h18004.www1.hp.com/products/blades/components/c-class.html#tab3_content

This thing was nice because it contains unified firmware updates for the OA, VC interconnect, and blade servers. I was really impressed to see the web interface provide status updates on the firmware installation while the maintenance tool was doing the install.

[MMP]

Hi,

I cannot use different version of IE as customers might use the IE6 .

I have already done the reset of OA

Cleared the cache too

Still get the same problem.

[WFHC-WI]

hi MMP,

You can begin by removing the Onboard Administrators for this enclosure and then pulling out and re-seating the OA sleeve. Replace the OAs and try again through your browser (IE6 should work fine.) As Adrian said, clear your cache and you may also want to add the enclosure DNS name and IP address to your "Trusted Sites."

If IE fails to allow the update, attempt via a telnet or SSH connection to the OA.

>>telnet
>>update image

You will need to provide an http, ftp, tftp address or have a USB key attached with the .bin file.

good luck, and assign points to your responders!