Problems installing drivers for QLogic cards

[CCW_NS]

We've got some DL465c blades, running Win2K3R2 SP2. When we try and install the ProLiant support pack, the install hangs at the QLogic driver install. Usually, it takes 15 mins to install just this one driver.

Are there any known problems/issues with the current PSP & Win2K3R2 ?

[Víctor Cespón]

Not with FC cards. Aye you using PSP 7.91?

[Raghuarch]

Try a custom install and install only that component.
Check the error log it should log messages if it fails.

Regards,
Raghuarch

[CCW_NS]

We are using the current PSP 7.91

The problem isn't that the driver doesn't install, it's that it takes 15 minutes to install.

[Venilton Junior]

Are the HBAs on production? Or are you trying to install drivers with them conected?

Just put then in offline mode and install the drivers with your PSP, to do that, just unplug your Fiber.

This will help you.

Next time, install your windows servers with SmartStart CD 7.91, which install ur Windows with PSP drivers :P

Regards

[VitalSprinter]

To Venilton de Carvalho

>>Just put then in offline mode and install the drivers with your PSP, to do that, just unplug your Fiber.

This will help you.

But if my Qlogic HBA is a primary controller, and I'm boot my Windows 2003 from a SUN. How to act to me??

[Venilton Junior]

Hi... you should have open another thread. But nway... whats your real problem? you can't update your HBA drivers?

If you haven't install your Windows... just install it with Smart Setup.

regards