proliant ml350 gen10

[kamgajackson]

bonjour a tous .    

mon probleme est le suivant.

apres avoir intallé le logiciel windows server 2019 sur mon serveur proliant ml350 gen10,  aucun  port reseau ne clignote . consequence mon serveur ne se connecte pas au reseau.     veuillez m'aider svp.   sauf le port ILO clignote

Google Translated:

Good morning all .

My issue is the following.

after installing windows server 2019 software on my ml350 gen10 proliant server, no network port is flashing. consequence my server does not connect to the network. please help me please. except the ILO port flashes

[sudhirsingh]

Hi,

Server comes with 4 x 1GbE Network ports.

You should check following basic steps to isolate the issue.

1. Ensure that Network adapters are detecting in the hardware level (During Post, BIOS also check in ILO console)

2. Check in Windows device manager for driver issue(Yellow exclamation for NIC )

3. Update Network driver and firmware.

4. Reseat/replace network cable and check. 

Driver:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_321fce2f873a4dd5931ad5a6e4&swEnvOid=2000152#tab-history

Firmware

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_419d98ca460242a8ada1795c5f&swEnvOid=2000152#tab-history

Hope this helps!

Regards,

Sudhir

[fabiofalo]

Hi, I have the same problem, and I haven't solved it with your advice...help!

it seems as if the ethernet cable is not connected, I have done various tests, the iLO ethernet port works instead.