PXE NIC boot order question

[chuckk281]

Question from Greg:

****************

How do I change the PXE boot order of the nics?

***************

Reply from Anton:

**************

Once you enable PXE on the NIC ports(embedded Port1 should have PXE enabled by default), the ports should appear in the boot order of the server – from there you can set which NIC port is used to boot first…

All that is done from the RBSU(don’t know which gen and nic you are referring to) but you can look in the RBSU user guide – pages 54 and 122 is what I think you need:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf

*****************

Other comments or suggestions?