HPE Community
BladeSystem - General
1755448 Members
3675 Online
108833 Solutions
New Discussion юеВ

Re: RAID Configuration Problem

 
SOLVED
Go to solution
UVA
Regular Advisor

тАО04-13-2008 11:04 PM

тАО04-13-2008 11:04 PM

RAID Configuration Problem

Hi Gurus,

Greetings of the day!

on one of my Bl860c server the H/W RAID was configured differently,that is in the IR volume group the SAS HD2 configured as primary disk and SAS HD1 configured as secondary .

is this configuation will impact on my system performance. How to revert the RAID conf without losing of DATA
on this.

Thanks in advance
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО04-14-2008 01:25 AM

тАО04-14-2008 01:25 AM

Solution

Re: RAID Configuration Problem

Don't worry. 1 disk must be the primary, the other the secondary - no matter which one it is.


Please close your duplicated thread.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
UVA
Regular Advisor

тАО04-14-2008 01:28 AM

тАО04-14-2008 01:28 AM

Re: RAID Configuration Problem

Hi,


Thanks Torzon.

0 Kudos
UVA
Regular Advisor

тАО04-14-2008 01:29 AM

тАО04-14-2008 01:29 AM

Re: RAID Configuration Problem




I found the solution about my query thaks for HP and experts
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.