BladeSystem - General
1748210 Members
4228 Online
108759 Solutions
New Discussion

Uplink Failure Detection in HP BLc GbE2c LY 2/3 Switch

 

Uplink Failure Detection in HP BLc GbE2c LY 2/3 Switch

Hi All,

I've in my design 4 HP BLc GbE2c LY 2/3 Switches, on VC Cards 1/2 I have only one upload link per VC card and I've enabled the UFD and the failover is working properly, for VC cards 3/4 I've 2 upload links per VC cards in two different VLANs, when enabled and configuring the UFD I’ve got an error and configurations can’t be saved, after checking the logs I found that I can’t add more than upload link to enable the UFD.

I have to have access links, and I don’t want to have a trunk link.

Any idea how this should works?


Thanks,
Mohamed
1 REPLY 1

Re: Uplink Failure Detection in HP BLc GbE2c LY 2/3 Switch

no response for this question