HPE Community
BladeSystem - General
1837195 Members
2508 Online
110114 Solutions
New Discussion

VC Ethernet cabling

 
Alex Samad
Frequent Advisor

‎02-23-2009 08:17 PM

‎02-23-2009 08:17 PM

VC Ethernet cabling

Hi

I have rack with 4 x C7000's each has 2 VC ETH + 2 VC FC. At the top of the rack I have 2900 (it has 4 10G ports on the back).

Is there any way for me to daisy chain the 10G ports on the VC ethernet up to the 2900 ?
0 Kudos
3 REPLIES 3
Ken Henault
Honored Contributor

‎02-24-2009 08:00 AM

‎02-24-2009 08:00 AM

Re: VC Ethernet cabling

Enclosure stacking is available as a beta feature in VC 1.34 firmware. It's likely to be released as a fully supported feature later this year.
Ken Henault
Infrastructure Architect
HP
0 Kudos
Alex Samad
Frequent Advisor

‎02-24-2009 07:06 PM

‎02-24-2009 07:06 PM

Re: VC Ethernet cabling

I was told to have a look at 2.1
0 Kudos
Ken Henault
Honored Contributor

‎02-25-2009 04:51 AM

‎02-25-2009 04:51 AM

Re: VC Ethernet cabling

You only need 2.1 if you're using flex-10 NICs. If not, you're better off with 1.34.
Ken Henault
Infrastructure Architect
HP
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.