VC Flex-10 with 1 VC Domain and 3 enclosures stacking for VMware vSphere ESX 5

[Alan_Ting]

I have a PoC configuration with VC Flex-10 with 1 VC Domain and 3 enclosures stacking.

Configuration:
3 enclosures stacking in one VC domain
Flex-10 on Bay1 and Bay2 Active/Active,
Bay1 port1 and 2 for stacking, port 3,4,5,6 for Uplink VLAN-Trunk-1
Bay2 port1 and 2 for stacking, port 3,4,5,6 for Uplink VLAN-Trunk-2
vSwitch0 for Management Console 1GB
vSwitch1 for vMotion 1GB
vSwitch2 for Production 7GB
vSwitch3 for  Isolated VLAN 1GB

It is possible implement vSwitch3 for isolated VLAN across 3 enclosures stacking and this meant all for UAT servers across 3 enclosures can ping across within 3 enclosures stacking and it should not link to production network.

Thank you

[Psychonaut]

Yes, just create it without any uplinks.  Any traffic on that network will not be able to leave the chassis.