VCEM

[MAH_2]

1)Hi I want to know how to configure the cluster heart beat Network using VC.

2)I have created server profile and configured the 8 NIC (Flex 10) .But in the server 4 is connected and others are disconected . Also in the server profile 4 NICs showinng OK.
Others showing "Duplicat Enet"

3)I want to replace the VC FC module and put the Blade SAN Switch while the server online and accessing the storage. Can i do this ????

[JKytsi]

1) Create a network in virtual connect domain without any uplinks, assign a NIC to server profile to that network for cluster members

2) Can You paste your profile here

3) NO

[BorysG]

2) I think, You trying connect two FlexNIC on the same vNet. This config is not supported by design

[MAH_2]

Pls check the attachment.

This is the erro I am gettig

[JKytsi]

Yep, You can't use same VC-net several times on same LOM

[MAH_2]

OK .
Then in this case how I can create 8 NICs for BL460cG6.

[JKytsi]

You have 8 NICs in the profile, but what do You gain assigning same network to all ? More complex teaming on OS side maybe.

[MAH_2]

I want to configure the 8NIcs for ESX server.

[MAH_2]

Also I want to know how to update the firmware for the VC.
I have tried to update the firmware using VCM.
But it is showing "file is too big".
I have installed the VCSU.
Pls tell me the command for updaiting the firmware using VCSU.

[JKytsi]

Maybe You should start assigning points to answers...

Forums user name: MAH
Company name:
Country / Region: bahrain
Personal quote:
Certification:
ITRC member since: March 03, 2009
Last contribution date: September 24, 2010
I have assigned points to 0 of 132 responses to my questions.