1845758 Members
4551 Online
110249 Solutions
New Discussion

Virtual Connect FC issue

 
Torsten.
Acclaimed Contributor

Re: Virtual Connect FC issue

I'm not sure at the moment if VC FC modules get an IP or not.

 

However, you cannot access them, that is normal.

All configuration is done via the VC ethernet modules.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
aisaddi
Occasional Visitor

Re: Virtual Connect FC issue

Hi Torsten,

I know that I cannot access the SAN modules direct. But the IP is needed that the SAN Module can communicate with the Enclosure and Ethernet module. 

The module on Bay 4 get an IP but not the moduel in Bay 3.

I have 22 Enclosures in my responibillity and only one has this strange error.

 

best regards

Karlheinz

frenchy94
Regular Advisor

Re: Virtual Connect FC issue

Try to switch module in slot (module in slot 3 in slot 4 module in slot 4 in
slot 3) to see if follow module



---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
Torsten.
Acclaimed Contributor

Re: Virtual Connect FC issue

No need to swap the module bays, you can also try in an empty slot.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!