Virtual connect support utility

[Davidss]

Ports used by Virtual connect support utility. My VC & OA is in DMZ. Do anyone knwo what are the ports required for using virtual connect support utility to update the firmwares (VC module)

[ericvandermeer_1]

Hi,

I think it's connecting by HTTP/HTTPS to the module and the firmware upgrade is done by creating a FTP on port 21.

In the user manual I can't find the ports the VCSU is using.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02657939/c02657939.pdf

Hope this helps?

Regards,
Eric

[ericvandermeer_1]

Btw, in VCSU 1.52 there are changes made to the firewall restrictions:

http://h30499.www3.hp.com/t5/HP-BladeSystem-News-Events/Virtual-Connect-Support-Utility-VCSU-1-5-2-changes-about/ba-p/2345321

[ericvandermeer_1]

If you are satisfied with the provided information then do not forget to assign points. This will help to get more and more response in this forum.