HPE Community
BladeSystem - General
1833780 Members
2764 Online
110063 Solutions
New Discussion

Will moving Chassis ILO to a different switch affect the ILO for the Blade Servers

 
SOLVED
Go to solution
AndrewUK
Occasional Contributor

‎09-10-2018 02:32 AM

‎09-10-2018 02:32 AM

Will moving Chassis ILO to a different switch affect the ILO for the Blade Servers

Hi,

We have a chassis c7000 (which contain a number of blade servers) and it has on the back an ILO connection connected to a network switch.

If we move the chassis ILO connection another switch, will it affect any of the ILO connections of the Blade servers ?

 

TIA

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎09-10-2018 03:46 AM

‎09-10-2018 03:46 AM

Solution

Re: Will moving Chassis ILO to a different switch affect the ILO for the Blade Servers

I assume you talk about the Onboard Administrator (OA)?

 

If the address range is changing, you need to adjust the OA address and the EBIPA address range.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
AndrewUK
Occasional Contributor

‎09-10-2018 07:20 AM

‎09-10-2018 07:20 AM

Re: Will moving Chassis ILO to a different switch affect the ILO for the Blade Servers

Thanks

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.