520WL Setup problems

[richard sanderson]

Hi All,

I am having problems setting up a 520WL AP with 2.1.2 firmware in the UK.
The WLAN is visable on the client machines but upon connection I am getting lost network packets ( loss and long ms on a ping). Distance is around 5m from AP. When I setup our old existing AP ( buffalo ) I get no packet loss ( this is disabled when using 520's).

I have changed the following :

chan ( auto and preset ) - AP and client
ap area size
ssid ( various names )

I have tried 2 different 520WL's and get the same problem - any ideas ?

Regard

Rich