Procurve Access Point 420

[Robert Mountjoy]

I'm getting an wlan1 beacon transmission problem at beacon #4737375! error also a radio interface Disabled error from my Wireless Access Point 420.
Any Ideas?

[Mohieddin Kharnoub]

Hi

Make sure you have the latest firmware for the 420, because there was an old issue with beacons.

http://www.procurve.com/software/downloads/LicenseInformation.aspx?fileName=http://www.hp.com/rnd/software/wap420_Download9.htm

Also, make sure that your site has no interference with your configured channel, and to do that, make a survey in around the 420 AP, and choose one of the 3 non-interfered channels 1,6 and 11 to avoid that.

Good Luck !!!