Wireless configuration with vlan

[Jef van Eijk]

Hi,

I have a 5406 with 2 2648 switches and AP 230.

My ap's are in the vlan 2100 (untagged) What i want to do is to set the SSID in a different vlan. But as i read it is not possibe to set the switch port tagged when there is a radio port connected to it.

[RicN]

Since the Radio Ports is un-intelligent they will forward ALL traffic encapsulated through VLAN 2100 to the WES module.

If you have configured the SSID on the WES to match to a certain VLAN it will tag the outgoing frames with the correct 802.1Q tag when leaving the WES module.

Just make sure to tag the *UP port in the switch with the same VLANs and it will work.