How to Add Multiple Network Interfaces in HP OneView

[Joao4]

Hello,

I have HP OneView running on a server. Currently, it is configured with a single primary network interface for management access.

My goal is to add additional network interfaces so that I can monitor and manage servers from different clients, each located in separate VLANs.

• Is it possible to configure OneView with multiple NICs?

• If yes, how should the interfaces be assigned (e.g., one for management access and others for monitoring traffic)?

• Are there any best practices or limitations when using OneView in multi-VLAN environments?

Any guidance, documentation, or practical examples would be greatly appreciated.

Thank you in advance.

[chrisoliver65]

You can add an additional network interface to a Oneview Appliance, with some limitations as noted in this guide:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00004827en_us&page=GUID-29568F8E-6A92-48E8-B801-D62D47CEB183.html&docLocale=en_US

This guide is for OV 9.1 but the same process holds for the current versions as well. 

[Mark-S]

Moving discussion to Forums > Software > OneView