2924 SpanningTree+LinkAggregation

[brunete]

hi forum





I have 2 SW 2924 in which 2 ports such as LAG and a third backup with STP as I do that to the failure of the LAG exit at the third link



this configuration is possible



thanks



sorry for the English

This message was edited by brunete on 10-28-09 @ 9:30 AM

[Fred_Mancen_1]

Hi. This topology doesn't make sense. You can use the three connections in the LAG without any problem, and the convergence will be more faster even if two links fail at the same time. Additionally, it would increase the throughput. You can have up to eight ports aggregated using the link-aggregation feature.



HTH

[brunete]

Thanks for the reply

today proves it



would be the next stage:

2 Links with LAG (Fiber) & 1 (STP)Wireless

if down the 2 fibers ,

directing all traffic for the wireless

This is possible?



excuse my English



Thanks

This message was edited by brunete on 11-3-09 @ 5:56 AM

[Fred_Mancen_1]

Hi.



OK, now I understand your needs. In theory, it's possible. I think you can customize the STP costs on the ports, assuming a higher value to the port where the wireless link is connected.



Try it and tell us if it works!



Regards

[brunete]

Hi

was correct as I mentioned Fred

but it worked better with the 2226

Gracias

[Fred_Mancen_1]

Good to hear from you that it works! Great...

Regards