4800G (ACLs)

[pawel_1]

Hi!

I cant understand how acls work in my switch.

I have read the manual about configuring ACLs and rules. I dont use the Web Interface, only CLI.

For example i have two PCs, connected to the switch. Ever PC has its own vlan, then i configured some vlan-interfaces in switch and routing is working fine. Now i want to play with ACLs. For example i want to block all traffic from one vlan or subnet or one pc, i use





acl number 2001

rule deny source 10.0.2.20 0



like in manual, but i still have pings and other traffic from this host.....why?



The second rule have to block icmp traffic with type 8 (ping).

Can you tell me what i am doing wrong!



P.S. Sorry for my English!

[Fred_Mancen_1]

You need to check if you are applying the ACL in the correct order; remember that ACLs need to be applied according the traffic direction; so if you are trying to block the incoming traffic from one VLAN, you need to ensure that the policy is placed in the correct way - incoming or outgoing packets.



HTH