A5800 GUI help

[jblackburn2]

I'm trying to add in the gui function which i've done before but i'm not seeing a command it usually run and i'm not sure where i've gone wrong.

so far i've run

system-view

IP http enable

local-user manager

password simple password

authorization-attribute level 3

service-type web

that normally does the trick however service-type web doesn't work. If i run service-type ? web doesn't show as an option.

I've added in a new Ip for this switch from 172.16.7.0 to 10.131.0.0

I can still access the gui from 172.16.7.0 but I get the user privileges message when I try to access via 10.131.0.0

I am connecting with telnet to the new IP 10.131.0.0

[HP-Browniee]

hello

You can use:

service-type http or https.

[Emil_G]

I think it should be rather

service-type telnet

[jblackburn2]

I don't get web, http or https as an option with service-type

I can only see ftp, lan-access, portal, ssh, telnet and terminal

[jblackburn2]

The software version on the switch is about 10 years out of date which won't help and is probably the cause. I'll update the switch and see it makes a difference

[VoIP-Buddy]

The Web GUI is not generally available on Data Center switches.  If it is there, it is a best effort and not all features may be available to configure.  You are best to stick with the CLI.

If the Web GUI is available, the service-type would be web.

Regards,

David